I have a 5 x 1500 Litre IBC suitable for Jet A1, Avgas or Diesel available.
NEW & Never Used.
Auto vent,
They still have tags on,
Surplus to requirements.
$5500 Plus GST, Each
Location Dalby QLD
Any inquiries to Brent, 0429 621 565
1500 litre Stainless IBC
-
- Gold Wings
- Posts: 179
- Joined: Dec 2007
1500 litre Stainless IBC
- Attachments
-
- IMG_1370.jpg (29.57 KiB) Viewed 4516 times
-
- IMG_1369.jpg (28.09 KiB) Viewed 4516 times
-
- IMG_1368.jpg (26.85 KiB) Viewed 4516 times
-
- IMG_1371.jpg (22.36 KiB) Viewed 4516 times
Last edited by Skywork on Sun Feb 11 2018, 05:10, edited 1 time in total.
-
- Silver Wings
- Posts: 48
- Joined: Oct 2012
Re: 1500 litre Stainless IBC
Are these tanks tested and certified (Avgas)? Or can they be?
- havick
- 4th Dan
- Posts: 1300
- Joined: Jun 2007
Re: 1500 litre Stainless IBC
Nice set up for remote ops and a decent Ute.
"You'll have to speak up, I'm wearing a towel."
-
- Gold Wings
- Posts: 159
- Joined: Dec 2011
Re: 1500 litre Stainless IBC
You will need dangerous good transport licence to cart them on a truck or trailer
-
- Gold Wings
- Posts: 179
- Joined: Dec 2007
Re: 1500 litre Stainless IBC
1 sold. Cheap approved transport of fuel
Test and approval in photo. Avgas ok. Drivers need a Dangerous Goods licence but vehicle does not as long as you comply with the numbers of IBCs on vehicle and quantities up to 3000 litres if vehicle is not DG there are conditions as per the DG Code 7.5 which is a national code . Some states have exemptions that fall outside the code. In WA no limit on a vehicle without DG Licence up to 10000 litres if on a truck with a tray.
If Vehicle has a DG Licence only limits is what is on your DG Licence and that can vary in each state
For more info best to gooogle DG code 7.5 edition.
Test and approval in photo. Avgas ok. Drivers need a Dangerous Goods licence but vehicle does not as long as you comply with the numbers of IBCs on vehicle and quantities up to 3000 litres if vehicle is not DG there are conditions as per the DG Code 7.5 which is a national code . Some states have exemptions that fall outside the code. In WA no limit on a vehicle without DG Licence up to 10000 litres if on a truck with a tray.
If Vehicle has a DG Licence only limits is what is on your DG Licence and that can vary in each state
For more info best to gooogle DG code 7.5 edition.
- Leethallee
- Gold Wings
- Posts: 120
- Joined: Apr 2007
Re: 1500 litre Stainless IBC
How much?
Judge your success by what you have had to give up to get it.
- havick
- 4th Dan
- Posts: 1300
- Joined: Jun 2007
Re: 1500 litre Stainless IBC
Leethallee wrote:How much?
It’s in the ad.
"You'll have to speak up, I'm wearing a towel."
-
- New Member
- Posts: 6
- Joined: Jan 2015
Re: 1500 litre Stainless IBC
In the three states I have dealt with (SA, VIC, TAS), you neither require a DG vehicle or driver licence to carry up to 3000L in IBCs provided they are not loaded or unloaded on the vehicle (i.e. hooked up to a pump and reel assembly)
Licencing is dealt with at the state level, usually by the worksafe authority, the only other difference in the states legislation is the $$ amount attached to the fines for non-compliance with the ADGC.
Despite not requiring a licence, you do however have to comply with all of the requirements of the ADGC regarding documentation, safety equipment, placarding, EIPs, etc.
To truly understand the implications it’s best you consult someone with a DG licence with a good understanding of the ADGC, it’s not something you can read and understand in an afternoon sitting.
One of these on a tandem trailer or two on the back of a light truck is definitely a viable option for any operation. It just comes with a lot of hoops to jump through.
If you can keep your rig <1000L then you can avoid most of the requirements all together as it no longer requires placarding or any of the mandatory equipment.
Licencing is dealt with at the state level, usually by the worksafe authority, the only other difference in the states legislation is the $$ amount attached to the fines for non-compliance with the ADGC.
Despite not requiring a licence, you do however have to comply with all of the requirements of the ADGC regarding documentation, safety equipment, placarding, EIPs, etc.
To truly understand the implications it’s best you consult someone with a DG licence with a good understanding of the ADGC, it’s not something you can read and understand in an afternoon sitting.
One of these on a tandem trailer or two on the back of a light truck is definitely a viable option for any operation. It just comes with a lot of hoops to jump through.
If you can keep your rig <1000L then you can avoid most of the requirements all together as it no longer requires placarding or any of the mandatory equipment.
-
- Silver Wings
- Posts: 46
- Joined: Oct 2011
Re: 1500 litre Stainless IBC
Is your understanding of this that it is under 1000 litres in one container or under 1000 in total?
I am limited to get four drums filled on one vehicle because refueler claims has to be less than 1000 litres Won't fill 5 because can that is potentially over a 1000 litres
I am limited to get four drums filled on one vehicle because refueler claims has to be less than 1000 litres Won't fill 5 because can that is potentially over a 1000 litres
-
- New Member
- Posts: 6
- Joined: Jan 2015
Re: 1500 litre Stainless IBC
Has to be less than 1000L total but in containers not bigger than 500L. Sorry I left that out.
4 drums is fine. 5 takes you over.
Or you could get 2 x 499L tanks.
4 drums is fine. 5 takes you over.
Or you could get 2 x 499L tanks.
-
- Gold Wings
- Posts: 179
- Joined: Dec 2007
Re: 1500 litre Stainless IBC
HI
These 5 have been sold but I know have another 2 available (identical and new). Last 2, no more after this. Have 25mm stand pipe with camlock for pump to fit . Location is also Dalby QLD.
Please call or text ,do not DM through here as I do not check for messages.
Thanks
Brent 0429 621 565
These 5 have been sold but I know have another 2 available (identical and new). Last 2, no more after this. Have 25mm stand pipe with camlock for pump to fit . Location is also Dalby QLD.
Please call or text ,do not DM through here as I do not check for messages.
Thanks
Brent 0429 621 565
Who is online
Users browsing this forum: No registered users and 10 guests